-40%

Gleason Model 645 Hypoid Gear Generator, 1980

$ 10296

Availability: 100 in stock
  • Power Source: Electric
  • Condition: Used
  • All returns accepted: ReturnsNotAccepted
  • Model: 645
  • Model Year: 1980

    Description

    New Page 1
    Gleason Hypoid Gear Generator
    Model 645
    New 1979 - 1980
    This machine was just removed from service. The hoses, pipes / plumbing and electric's on the coolant tank and chip conveyor were disconnected. They were "bagged and tagged" In other words, they were labeled so that they can be put back together without the guess work.
    Includes misc. change gears
    Includes manuals and schematics
    Wired for 440 volts, 3 phase
    Machine is located in Bridgeport, CT 06607
    The machine weight is approx. 58,000 lbs. A rigger is required to load
    Machine is sold as is where is as inspected
    Below are catalog spec's. (To be verified by inspection)
    Outer Core:
    14.22" , 14.05" , 14.88"
    Spiral Angle:
    29.75", 30 Deg, 35 Deg.
    Cutter Diameter:
    12", 16" , 18"
    Extreme Ratio:
    10:1
    Root Angle Range:
    -8Deg. to 90Deg.
    Maximum Radial Setting:
    10.50"
    Coarsest Pitch:
    1.5 DP
    Full Depth:
    1.25"
    Face Width Max.:
    4.60"
    Index Range:
    5-80 Inclusive
    Work Spindle ::
    Diameter of Taperhole at Large End 6"
    Taper/Ft:
    3/4"
    Taper/Depth:
    6"
    Diameter of Hole thru Spindle:
    5"
    Cutter Diameter:
    9", 12", 16", 18"
    Work Head Setting:
    Offset Above Center 4 1/2"
    Offset Below Center:
    4 1/2"
    Machine Center to Nose of Spindle:
    23.5"
    Speed/Feeds:
    Cutter 19-167RPM
    Electrics:
    460 Volts AC Motor and Controls
    Weight:
    55,000 Lbs.
    Equipped With:
    Feeds Infinite Variable from 7 Second Per Tooth
    Coolant
    Hydraulics
    Chip Auger