-40%
Gleason Model 106 Hypoid Gear Generator
Gleason Model 106 Hypoid Gear Generator
Gleason Model 106 Hypoid Gear Generator
Gleason Model 106 Hypoid Gear Generator
Gleason Model 106 Hypoid Gear Generator
Gleason Model 106 Hypoid Gear Generator
Gleason Model 106 Hypoid Gear Generator
Gleason Model 106 Hypoid Gear Generator
Gleason Model 106 Hypoid Gear Generator
Gleason Model 106 Hypoid Gear Generator
Gleason Model 106 Hypoid Gear Generator
Gleason Model 106 Hypoid Gear Generator

Gleason Model 106 Hypoid Gear Generator

$ 10560

Availability: 98 in stock
  • Condition: The Gleason 106 appears to be in very good condition. It can be inspected under power on our floor. It is being offered as shown, with enough change gears to run it and stock divider. There is a video of it under power on the listing. We will load on a flat bed truck at no additional charge. No Vans No Containers.
  • Model: Model 106
  • Machine Type: Gear Generator
  • Brand: Gleason

    Description

    SPECIFICATIONS
    LABEL
    UNIT
    Cone Distance Max (30" Spiral Angle & 7-1/2" Cutter)
    4-1/4"
    Gear Pitch Diameter Max
    10 to 1
    10 to 1 Ratio
    8 - 1/2"
    2 to 1 Ratio
    7 - 1/2"
    1 to 1 Ratio
    6"
    Diametral Pitch (Coarsest)
    4
    Full Depth Max
    .625"
    Face Width Max
    1 - 1/4"
    Number of Teeth
    5 to 150
    WORK SPINDLE
    :
    Diameter of Taper Hole at Large End
    3 - 29/32"
    Taper per Foot
    89/64"
    Depth of Taper
    6"
    Diameter of Hole Through Spindle
    2 - 7/16"
    Diameter of Spindle Nose
    5 - 11/82"
    Cutter Diameter
    3 - 1/2", 4 - 1/2", 5", 6", 7 - 1/2"
    WORK HEAD
    :
    Offset Above Center Max
    8"
    Offset Below Center Max
    8"
    Distance from Machine Center to Nose of Spindle Max
    9"
    Distance from Machine Center to Nose of Spindle Minimum
    1 - 1/4"
    Cutter Speeds
    54 - 418 RPM
    Feeds (seconds per tooth)
    5 - 73 seconds
    Feed Motor
    5 HP, 1800 RPM
    Hydraulic Motor
    1 HP, 1800 RPM
    Coolant Motor
    1/2 HP, 8600 RPM
    Floor Space
    84" x 61"
    Net Weight
    15,500 lbs
    EQUIPPED WITH:
    Completer with Helical Motion and Roll Centering. Hydraulic Chucking. Change Gears. Automatic Stop Counter. Stock Divider. Coolant with Magnetic Chip Separator. Drawings.
    See this Gleason in Action